| Name | Hercules-Type Wire Cutter – 2.2 mm Wire Max |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers – Hercules-Type Wire Cutters |
| Material Finish | Stainless Steel/Tungsten Carbide/Rubber |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Lexis Industry |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hercules-Type Wire Cutter – 2.2 mm Wire Max
for drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7″ (18.0 cm)Â Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 2.2 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Description
Reviews (0)
Shipping & Delivery
Related products
Double Action Pin Cutter
side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Long Jaw Needle Nose Pliers
2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm)Â Long Jaw Needle Nose Pliers are crafted for use in many different orthopedic surgical procedures. The long tapered jaw design gives the surgeon ability to access deeper into the surgical field. These pliers can be used to firmly grasp wire to twist it or to put particular bends into wire to fasten them to bony sites or around fracture repair to confer additionally stability and accelerate the healing time.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Flat Nose Pliers – Slender Jaws
slender jaws, 2.0 mm tip, 6" (15.2 cm)Â Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Delicate Wire Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)Â Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Blunt Jaw Pliers
5-1/2" (14.0 cm)Â Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.
Reviews
There are no reviews yet.