Name | Malik Cystic Duct Forceps |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;513369;51-3369;5133-69; |
Specialty | General Instruments-Ring-Handled Forceps – Gall Duct |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Lexis Industry |
Sterility | Non-Sterile |
Usage | Reusable |
Malik Cystic Duct Forceps
Malik Cystic Duct Forceps
8-1/2″ (21.5 cm)
Malik Cystic Duct Forceps have jaws that are curved at a right angle to provide a better grasp to areas that are harder to reach. For example, if a patient has cholecystisis, the forceps are used to grasp the cystic duct. This instrument is offered in an 8 ½” length for deep locations.
SKU:
BF-5745
Category: Forceps & Clamps
Description
Reviews (0)
Be the first to review “Malik Cystic Duct Forceps” Cancel reply
Shipping & Delivery
Related products
Allis Tissue Forcep
Allis Tissue Forceps
standard pattern
standard pattern of the Allis Tissue Forceps are intended for the use of firmly grabbing or holding body tissue during surgery. This pattern includes a ratchet ring-handle with a selection of different sizes and types of teeth to accommodate various medical procedures. These teeth curve to the inside and may cause less harm to the tissue because of decreased general pressure applied to the area.
Adson Tissue Forceps
2x3 teeth, 4-3/4" (12.1 cm)
Adson Tissue Forceps are handcrafted from surgical grade German stainless steel. The standard pattern is available with 2x3 teeth and is ideal for handling the various thicknesses of tissues. The serrated handle offers a comfortable and secure grip for the surgeon. They are comprised of premium, German stainless steel and come with a dull, satin finish to reduce glare. This instrument is protected by the Lexis Industry manufacturer warranty on defects in materials and workmanship.
Adlerkreutz Tissue Forceps – Narrow Jaws
Narrow jaws, 2x3 teeth
Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with narrow jaws and 2x3 teeth for a secure grip on tissues. The slim design allows for delicate and precise dissection and tissue handling while the wider grip assures a comfortable grip for the surgeon.
Adson Artery Forceps – Delicate
Delicate pattern, 1x2 teeth, 7-1/8" (18.0 cm)
Adson Artery Forceps are 7 1/8" and are developed with 1x2 teeth in a delicate pattern with either curved or straight jaws to suit different needs. Primarily applied during operations in which arteries need to be grasped or compressed, the teeth on the tips of the jaws interlock to confirm that a tight grip is held.
Adson-Baby Forceps
Adson-Baby Forceps
narrow, curved, very delicate
Adson-Baby Forceps are typically used to grasp delicate tissue due to during general surgeries, especially in plastic surgery procedures. The very delicate pattern of the forceps includes partially serrated jaws that are narrow and curved. These jaws are also offered in two different lengths and are intended for tissue to be handled carefully.
Babcock Intestinal Forceps
Jaws w/ atraumatic parallel serrations
Babcock Intestinal Forceps have jaws with atraumatic parallel serrations that are intended to hold a shorter section of intestine with minimal trauma and constriction. There is a ratchet on the inner side of the ring-handles so that the forceps can lock in place when needed during a surgical procedure. The forceps are polished to a dull, satin finish to minimize glare below operating room lights.
Adlerkreutz Tissue Forceps
Adlerkreutz Tissue Forceps
4x5 teeth
Adlerkreutz Tissue Forceps are handcrafted from surgical grade German stainless steel. Designed with 4x5 teeth for a secure grip on tissues. The design allows precise dissection and tissue handling while the teeth assure a secure grasp. Available in a 6" or 8" model.
Adson Bipolar Forceps
Adson Bipolar Forceps
1.0 mm tip, smooth jaw, 4-3/4" (12.0 cm)
Adson Bipolar Forceps are designed to minimize heat and current while coagulating. For use during bipolar electrosurgical procedures, these forceps are designed with a 1.0 mm tip and a smooth jaw. Available in both insulated and insulated with irrigation. Just as with their standard counterparts, these forceps are the most common bipolar forcep model. Bipolar forceps are designed to control temperatures, minimize heat and current spread and reduce tissue sticking or charring while coagulating during bipolar electrosurgical procedures. They are available in a variety of styles that provide bipolar coagulating capabilities for a wide range of procedures: irrigating or non-irrigating (for flushing surgical site to improve visualization), with or without insulation (to eliminate conduction to surrounding tissues when performing deep procedures), straight or bayonet-shaped (to enhance visibility by keeping the surgeon's hand from the line of sight). Manufactured from premium, German stainless steel with a satin finish. Call us today regarding non-stick versions of our line of bipolar forceps.
Reviews
There are no reviews yet.